Gear inspection begins with routine inspections on the production floor and extends into the QC Lab for the complex analytical gear evaluation. These inspection procedures are necessary to maintain process control and to produce parts to specification and to the required quality levels. In particular, inspection can assist in controlling:
• Size • Quality • Machine set-up • Part blank quality • Cutting Tool Accuracy • Heat treat process etc.
Condition of the production equipment The following information summarizes the basic elements of gear inspection beginning with the most simple and leading to the more complex.
Size Inspection The traditional method of inspecting a gear for correct size is the measurement over pins. Pin measurement provides an accurate and convenient method of determining gear tooth thickness of any diameter within the accuracy of the measuring device. Composite testing can also provide a measurement of gear tooth size. Size measurement is used to provide the correct backlash when the gear is mounted with its mating gear at operating center distance.
Runout Inspection Runout The maximum variation of the distance between a surface of revolution and a datum surface, measured perpendicular to that datum surface. Runout of a gear can be measured with a dial indicator over a pin or ball placed in successive tooth spaces. CNC gear measuring machines provide this inspection during a fully automatic cycle. Runout measurement is used to assure correct backlash and minimum variation of rotary motion.
Composite Inspection The composite test of a gear is a method of inspection in which the work gear is rolled in tight double flank contact with a master gear. AGMA defines this type of inspection as “radial composite deviation.” No backlash is provided, as the work gear is spring-loaded against the reference gear on the inspection machine. The composite action test is made on an inspection instrument that will allow variation in the center distance during rolling. This variation in center distance will yield a “tooth-to-tooth” and a “total composite” indication that can be read on a simple dial indicator or recorded graphically.
Composite inspection is a useful shop-friendly tool to determine the general quality of a gear including size, runout, tooth-to-tooth rolling action, and to detect nicks. It is not an appropriate method to determine individual tooth flank errors.
Profile Inspection Profile is the shape of the gear tooth curve and is measured from the root to the tip of the gear tooth. The functional, or operating, portion of the profile is the area that is in actual contact during tooth mesh. Typically, this area is from just above the root fillet to the tip of the tooth. On most parallel axis gears, the shape of the profile curve is an involute. In practice, an appropriate measuring machine aligns the measuring probe on the test gear in the middle of the gear face. Most gear measuring machines use the generative principle to create a reference profile to compare to the gear’s actual profile. The profile is traced and recorded graphically, with a correct unmodified profile being represented as a straight line on the chart.
Figure 6. Profile inspection with degrees of roll, roll angle.
Incorrect profile will cause a non-uniform rolling action of the gear, which may cause a large tooth-to-tooth error, uneven loading, and noise problems. In extreme cases, premature gear failure may occur.
Helix Inspection AGMA’s current inspection handbook defines “helix deviation” (formerly tooth alignment variation and lead variation) as the difference between the measured helices to the design helices. In practice an appropriate measuring machine aligns the measuring probe on the test gear at the pitch circle diameter and the “lead” is traced and recorded graphically, with a correct unmodified helix being represented as a straight line on the chart. Helix measurement is used to determine correct face contact between mating gears. Incorrect helix will create uneven loading and noise.
Figure 7. Graphic charting of helix deviation. Pitch or Index Inspection Spacing is the theoretical true position of each tooth around the circumference of the gear. Pitch deviation is the difference between the theoretical position and the actual position of each tooth. These values can be plus or minus. Index variation is the displacement of any tooth from its theoretical position relative to a datum tooth.
Total pitch variation and total index variation are identical values and are generally referred to as “accumulated spacing.” Total index variation is the maximum algebraic difference between the extreme values of index variation.
Two distinct methods are available to arrive at tooth “spacing.” One utilizes a single-probe measuring device with a precision indexing system. This indexing system can be electronic, as on a CNC measuring machine, with an encoder-controlled rotary axis. It can also use mechanical devices such as index plates, circular divider, or optical scales. The second system utilizes two probes to obtain successive data from adjacent tooth flanks as the gear is rotated. The data obtained from the two-probe system must be mathematically corrected to obtain spacing values. It is recognized today that the single probe system is the most accurate and the preferred system.
Figure 8. Pitch measurement using a pitch comparator and angular indexing.
Index measurements are used to determine the correct spacing of gear teeth. Spacing error is the principle source of gear noise due to total pitch variation or accumulated spacing. Although the main component of total pitch variation is from part runout, it may not be possible in all cases to detect this from a simple runout or composite inspection check.
Single Flank Inspection Single flank inspection appears to be identical with the composite, or double flank, inspection technique. In fact, it is quite different due to the fact that the test gear is rolled at its design center distance and backlash with a master or reference gear. This closely simulates the operation of the actual gear.
Figure 9. Difference between double and single flank inspection.
A single flank inspection instrument utilizes encoders on the two axes of rotation either as a fixed or portable unit. The rotational data from each encoder is then processed electronically, and the resulting phases are compared with each other to yield a phase differential. This will indicate errors of rotational motion from the ideal constant angular velocity of perfectly conjugate gears. The results of this phase difference are graphically recorded as an analog waveform, similar to a composite inspection chart.
The most important aspect of single flank inspection is its ability to measure profile conjugacy. The data is also related to profile variation, pitch variation, runout, and accumulated pitch variation. Single flank testing does not eliminate the need for analytical inspection of helix deviation, and it is not as effectively applied to gear sets with increased contact ratios such as helical gears.
Summary The AGMA standards referenced in this paper are presently the most advanced gear specifications available in the world. AGMA has worked with ANSI and with ISO to achieve this and presently chairs the ISO Gear Committee. The AGMA standard is a valuable specification not only to specify the level of gear accuracy but also to establish criteria between a vendor and a supplier, to measure accuracy capability of gear production equipment, or as a machine tool acceptance standard. Other specifications exist such as the German Standard, DIN, the British Standard, BS, and the Japanese Standard, JIS. Independent standards also exist based upon the experiences of individual manufacturers.
Today’s CNC controlled gear inspection machines measure and record gear errors. machines are CNC controlled and, as such, offer additional capabilities to measure other part parameters as well as the cutting and finishing tools that produce the gear teeth. The CNC machines also offer the ability to link the measured data to a computer system for automatic interpretation. A current development is to offer CMM type inspection machines with gear inspection capability.